MagMate® PowerLift® Rare Earth Lifting Magnets
Compact Power: Take the Strain Out of Heavy Steel Handling
If moving thick, rigid steel components is creating a bottleneck in your shop or putting unnecessary strain on your team, the MagMate PowerLift is your solution. Small in size but incredibly powerful, this rare earth permanent lifting magnet turns demanding material handling into a smooth, effortless operation.
Engineered for versatility, the PowerLift safely maneuvers non-flexing steel across both flat and rounded surfaces. Because it relies on a permanent rare earth magnetic design, it guarantees continuous holding power—eliminating any risk of dropped loads due to unexpected power failures.
Engineered for Surface Protection & Absolute Safety
The PowerLift features a specialized internal ON/OFF mechanism that keeps the magnetic engagement internal until activated, ensuring no friction or scraping damages your stock's finished surface.
Operator safety is heavily prioritized with an innovative positive-locking handle. Operators must manually engage and disengage the locking mechanism to switch states. This intentional design prevents the handle from being accidentally left "partially on," ensuring the magnet is fully engaged before any lift begins.
Key Features & Benefits
-
Dual-Surface Capability: Masterfully grips both flat plates and cylindrical/round materials.
-
Fail-Safe Security: Permanent rare earth magnets retain their hold even during complete power outages.
-
Positive Lock Handle: Prevent incomplete engagement with a handle that requires a deliberate manual switch to lock ON or OFF.
-
Surface Protection: Internal release components preserve material finishes from scratches or gouging.
-
Industry Compliance: Built to meet strict ASME B30.20 BTH-1 (Design Category B, Class 3) standards with a 3:1 design factor.
-
Thermal Resistance: Maintains full operational integrity in environments up to 180°F (82°C).
Technical Specifications
Material Thickness & Maximum Sheet Length Guidelines
The following matrix shows the adjusted Working Load Limit (WLL) for flat material based on stock thickness and maximum recommended sheet lengths to account for material sag during single-magnet use.
-
CF = Consult Factory
-
NA = Not Applicable (The magnet will not turn "ON" at these thin material thresholds).
Important Usage Notes:
Built-In Safety Factor: Stated Working Load Limits (WLL) represent 33% of the actual breakaway force to maintain a rigorous 3:1 safety threshold.
Overlength Material: For steel sheets exceeding 8 feet in length, it is highly recommended to use two or more units suspended from a spreader bar to counteract flexing, sagging, or peel-off risks.
Magnetic Bleed-Through: Exercise caution with thin stock; strong magnetic fields can pass completely through a thin sheet, resulting in two pieces being lifted simultaneously.
Full Contact Required: To ensure the mechanism properly engages and safely releases, the item being lifted must fully cover the entire length and width of the magnetic poles.
Round Material Conditions: Round WLL values are calculated under ideal lab conditions. Always consult the factory to verify your application parameters before using these magnets on curved surfaces.
We typically process orders within 1 to 2 days. Please be aware that the deadline for placing orders is 5 p.m. Orders submitted after this time will be processed the next business day.
Shipping Information:
Expect your order to arrive in 4 to 7 days, and we offer free shipping. Please note that we currently only ship within the United States. International shipping is not available.
The majority of our orders are dispatched via third-party freight carriers (18-wheelers). In case your order includes an item that requires freight shipping, we will contact you to schedule a curbside delivery. Ensure that your contact number is correct at checkout.
Order Confirmation and Payment:
After you place your order, a confirmation email will be sent to you. This confirms that your order is registered in our system and your credit card is authorized for the purchase.
Your card will be charged only when the item is shipped. For backordered items, we might hold a charge to reserve the product for you. As soon as we receive your order, we begin processing it immediately!
Our 100% Price Match Guarantee has the following restrictions:
- Promotional offers such as rebates, bundles, or “buy one, get one free” are excluded.
- Auction sites and discount marketplaces (e.g., eBay) do not qualify.
- The competitor must be an authorized retailer of the product in question.
- Price comparisons are based on the total order cost, including product price, sales tax, and shipping.
- Price matching is not available for exchanges, replacements, or warranty claims.
Please Note: Some Exclusions May Apply
Refunds and Returns Policy
We know things don’t always go as planned. Whether you received the wrong item or need to send something back, our return process is here to keep things simple. Here's what you need to know:
Return Timeframe
You may request a return within 30 days of receiving your order. Please reach out within that window to ensure eligibility.
Return Eligibility Criteria
To be considered for a return:
- Items must be unused and in original condition
- All tags and packaging must be intact
- A receipt or order confirmation is required
Products that arrive used, installed, or altered will not qualify for a return.
How to Request a Return
Email our support team at support@servicesupplydepot.com to begin the return process. We’ll respond with detailed return instructions and the appropriate return address.
Please do not return items without contacting us first. Unauthorized returns will not be accepted.
Shipping Costs for Returns
If your order arrived damaged or we sent the wrong item—we’ve got you covered. We’ll take care of the return shipping cost.
If you're returning something because you changed your mind or ordered the wrong item, we kindly ask that you cover the return shipping
Do you have a restocking fee?
Yes, we charge a 25% restocking fee. This fee covers inspection, repackaging, and restocking logistics.
Return Method
All returns must be shipped back to us—we do not accept in-person or drop-off returns.
Return Labels
For defective or damaged items, please get in touch with us and we’ll email you a prepaid return label. Simply download, print, and attach the label to your return package.
Refunds
Once your return arrives and passes inspection, we’ll notify you via email. If the return is approved, your refund will be issued to the original payment method within 3–5 business days.
Refund Not Received?
If it’s been more than 5 business days since your refund approval:
- Recheck your bank account
- Contact your card provider
- Check with your bank for processing times
Still waiting? Reach out to us at support@servicesupplydepot.com and we’ll investigate.
Order Issues & Damaged Shipments
We ask that you inspect your shipment upon delivery. If anything arrives broken, incorrect, or incomplete, contact us immediately so we can resolve the issue without delay.
Product Exchanges
We only offer exchanges for products that are damaged or defective. If you need a replacement for the same item, contact us at support@servicesupplydepot.com and we’ll get you set up.
Shipping Address Changes
If you need to update the shipping address for an order, please notify us within 24 hours of placing your order. Once processing begins, address changes are not guaranteed.
Description
MagMate® PowerLift® Rare Earth Lifting Magnets
Compact Power: Take the Strain Out of Heavy Steel Handling
If moving thick, rigid steel components is creating a bottleneck in your shop or putting unnecessary strain on your team, the MagMate PowerLift is your solution. Small in size but incredibly powerful, this rare earth permanent lifting magnet turns demanding material handling into a smooth, effortless operation.
Engineered for versatility, the PowerLift safely maneuvers non-flexing steel across both flat and rounded surfaces. Because it relies on a permanent rare earth magnetic design, it guarantees continuous holding power—eliminating any risk of dropped loads due to unexpected power failures.
Engineered for Surface Protection & Absolute Safety
The PowerLift features a specialized internal ON/OFF mechanism that keeps the magnetic engagement internal until activated, ensuring no friction or scraping damages your stock's finished surface.
Operator safety is heavily prioritized with an innovative positive-locking handle. Operators must manually engage and disengage the locking mechanism to switch states. This intentional design prevents the handle from being accidentally left "partially on," ensuring the magnet is fully engaged before any lift begins.
Key Features & Benefits
-
Dual-Surface Capability: Masterfully grips both flat plates and cylindrical/round materials.
-
Fail-Safe Security: Permanent rare earth magnets retain their hold even during complete power outages.
-
Positive Lock Handle: Prevent incomplete engagement with a handle that requires a deliberate manual switch to lock ON or OFF.
-
Surface Protection: Internal release components preserve material finishes from scratches or gouging.
-
Industry Compliance: Built to meet strict ASME B30.20 BTH-1 (Design Category B, Class 3) standards with a 3:1 design factor.
-
Thermal Resistance: Maintains full operational integrity in environments up to 180°F (82°C).
Technical Specifications
Material Thickness & Maximum Sheet Length Guidelines
The following matrix shows the adjusted Working Load Limit (WLL) for flat material based on stock thickness and maximum recommended sheet lengths to account for material sag during single-magnet use.
-
CF = Consult Factory
-
NA = Not Applicable (The magnet will not turn "ON" at these thin material thresholds).
Important Usage Notes:
Built-In Safety Factor: Stated Working Load Limits (WLL) represent 33% of the actual breakaway force to maintain a rigorous 3:1 safety threshold.
Overlength Material: For steel sheets exceeding 8 feet in length, it is highly recommended to use two or more units suspended from a spreader bar to counteract flexing, sagging, or peel-off risks.
Magnetic Bleed-Through: Exercise caution with thin stock; strong magnetic fields can pass completely through a thin sheet, resulting in two pieces being lifted simultaneously.
Full Contact Required: To ensure the mechanism properly engages and safely releases, the item being lifted must fully cover the entire length and width of the magnetic poles.
Round Material Conditions: Round WLL values are calculated under ideal lab conditions. Always consult the factory to verify your application parameters before using these magnets on curved surfaces.
Delivery Information
We typically process orders within 1 to 2 days. Please be aware that the deadline for placing orders is 5 p.m. Orders submitted after this time will be processed the next business day.
Shipping Information:
Expect your order to arrive in 4 to 7 days, and we offer free shipping. Please note that we currently only ship within the United States. International shipping is not available.
The majority of our orders are dispatched via third-party freight carriers (18-wheelers). In case your order includes an item that requires freight shipping, we will contact you to schedule a curbside delivery. Ensure that your contact number is correct at checkout.
Order Confirmation and Payment:
After you place your order, a confirmation email will be sent to you. This confirms that your order is registered in our system and your credit card is authorized for the purchase.
Your card will be charged only when the item is shipped. For backordered items, we might hold a charge to reserve the product for you. As soon as we receive your order, we begin processing it immediately!
Price Match Guarantee
Our 100% Price Match Guarantee has the following restrictions:
- Promotional offers such as rebates, bundles, or “buy one, get one free” are excluded.
- Auction sites and discount marketplaces (e.g., eBay) do not qualify.
- The competitor must be an authorized retailer of the product in question.
- Price comparisons are based on the total order cost, including product price, sales tax, and shipping.
- Price matching is not available for exchanges, replacements, or warranty claims.
Please Note: Some Exclusions May Apply
Returns
Refunds and Returns Policy
We know things don’t always go as planned. Whether you received the wrong item or need to send something back, our return process is here to keep things simple. Here's what you need to know:
Return Timeframe
You may request a return within 30 days of receiving your order. Please reach out within that window to ensure eligibility.
Return Eligibility Criteria
To be considered for a return:
- Items must be unused and in original condition
- All tags and packaging must be intact
- A receipt or order confirmation is required
Products that arrive used, installed, or altered will not qualify for a return.
How to Request a Return
Email our support team at support@servicesupplydepot.com to begin the return process. We’ll respond with detailed return instructions and the appropriate return address.
Please do not return items without contacting us first. Unauthorized returns will not be accepted.
Shipping Costs for Returns
If your order arrived damaged or we sent the wrong item—we’ve got you covered. We’ll take care of the return shipping cost.
If you're returning something because you changed your mind or ordered the wrong item, we kindly ask that you cover the return shipping
Do you have a restocking fee?
Yes, we charge a 25% restocking fee. This fee covers inspection, repackaging, and restocking logistics.
Return Method
All returns must be shipped back to us—we do not accept in-person or drop-off returns.
Return Labels
For defective or damaged items, please get in touch with us and we’ll email you a prepaid return label. Simply download, print, and attach the label to your return package.
Refunds
Once your return arrives and passes inspection, we’ll notify you via email. If the return is approved, your refund will be issued to the original payment method within 3–5 business days.
Refund Not Received?
If it’s been more than 5 business days since your refund approval:
- Recheck your bank account
- Contact your card provider
- Check with your bank for processing times
Still waiting? Reach out to us at support@servicesupplydepot.com and we’ll investigate.
Order Issues & Damaged Shipments
We ask that you inspect your shipment upon delivery. If anything arrives broken, incorrect, or incomplete, contact us immediately so we can resolve the issue without delay.
Product Exchanges
We only offer exchanges for products that are damaged or defective. If you need a replacement for the same item, contact us at support@servicesupplydepot.com and we’ll get you set up.
Shipping Address Changes
If you need to update the shipping address for an order, please notify us within 24 hours of placing your order. Once processing begins, address changes are not guaranteed.
Bunn GVH Series Retail Bulk Coffee Grinders - Available with 1, 2 or 3 Pound Hopper
Hopper Size
