True Refrigeration T-72-HC Description
The True T-72-HC three-section refrigerator is built with a powerful compressor and large evaporator and condenser coils to maintain cabinet temperatures between 33 and 38 degrees Fahrenheit. A self-contained capillary tube system in the unit holds and controls the flow of R290 hydrocarbon refrigerant. For movement, 4-inch-diameter stem castors are bottom mounted and the front set locks for stability. Each door has a magnetic gasket that snaps into the frame to prevent cold air from seeping out.
Reversing for 20 seconds when the compressor turns on, the fan motor helps remove buildup of debris, dust, and dirt to maintain a clean condensing coil. This mechanism helps it operate more efficiently over time, using less energy overall. Despite its effectiveness, users should continue to implement preventative maintenance for the coil.
The equipment's condensing unit is located in the bottom of the cabinet, so critical components are accessible for cleaning and maintenance. A bottom-mounted condensing unit also means the unit runs in the coolest part of the kitchen where it is less likely to capture airborne grease. For energy-efficiency, the True T-72-HC reach-in refrigerator is insulated with foamed-in-place polyurethane insulation.
Product Details
- Self-contained capillary tube system uses R290 hydrocarbon refrigerant
- Temperature range: 33-38 degrees F
- Powerful horsepower compressor is balanced with a large condenser and evaporator coils for quick temperature recovery
- Compressor fan motor blows in a reverse direction to clean condensing coil
- Large evaporator fans powered by sealed, self-lubricating, cast iron motors move air through cabinet consistently for even temperatures
- Bottom-mounted condensing unit is accessible for cleaning and maintenance
- 4-in.-dia. stem castors enable the unit to be wheeled out for cleaning underneath
- 9 gray PVC-coated wire shelves are included
- Each shelf mounts on 4 chrome-plated clips and is adjustable along support pilaster on 1⁄2-in. increments
- Cabinet interior is illuminated with incandescent lighting, which is safety-shielded for break protection
- Exterior temperature display shows internal temperatures
- Epoxy-coated evaporator is corrosion protection
Durable Doors and Cabinet
- Finished with durable stainless steel fronts
- Interiors are lined with durable, clear-coated aluminum to simplify cleaning
- Cabinet ends, back, and top are finished in anodized aluminum
- Interior floor is made of stainless steel with coved corners
- Cabinet structure is insulated with foamed-in-place polyurethane
- Heavy-duty steel frame rail is powder-coated black for rust resistance
- 12-in. recessed door handles are attached with a sheet metal interlock to ensure they stay permanently attached
- Doors are self-closing to prevent cool air loss
- Door gaskets snap into place with magnets and are removable without tools for cleaning
Dimensions & Utilities
- Shelves: 241⁄8 in. W x 223⁄8 in. D
- Overall: 781⁄8 in. W x 291⁄2 in. D x 835⁄16 in. H
- 6.9 A, 3⁄4 HP
- 115 V/60 Hz/1 ph, 9-ft. cord with a NEMA 5-15P plug
True Refrigeration T-72-HC Specifications
Spec Attribute | Spec Value |
---|---|
Manufacturer | True Refrigeration |
Additional Info | Contact Customer Service for Additional Information |
Color | Silver |
Compressor Location | Bottom |
Cubic Feet | 72 |
Depth (in) | 29.5 |
Door Type | Solid |
Doors | Full |
Evaporator Type | Capillary Tube |
Height (in) | 78.38 |
Hertz | 60 |
Hinge Configuration | Left/Right |
Interior Material | Aluminum |
NEMA | 5-15P |
No. of Doors | 3 |
Phase | 1 |
Product | Reach-In Refrigerators |
Product Type | Commercial Refrigeration |
Rating | Better |
Refrigerant | R290 (Hydrocarbon) |
Sections | 3 |
Series | T Series |
Supports | Casters |
Thermometer Type | Digital |
Type | Reach In |
Voltage | 115 |
Warranty | 3 year parts & labor; 7 year compressor |
Width (in) | 78.13 |
Number of Shelves | 9 |
Weight | 575.00 |
We typically process orders within 1 to 2 days. Please be aware that the deadline for placing orders is 5 p.m. Orders submitted after this time will be processed the next business day.
Shipping Information:
Expect your order to arrive in 4 to 7 days, and we offer free shipping. Please note that we currently only ship within the United States. International shipping is not available.
The majority of our orders are dispatched via third-party freight carriers (18-wheelers). In case your order includes an item that requires freight shipping, we will contact you to schedule a curbside delivery. Ensure that your contact number is correct at checkout.
Order Confirmation and Payment:
After you place your order, a confirmation email will be sent to you. This confirms that your order is registered in our system and your credit card is authorized for the purchase.
Your card will be charged only when the item is shipped. For backordered items, we might hold a charge to reserve the product for you. As soon as we receive your order, we begin processing it immediately!
Our 100% Price Match Guarantee has the following restrictions:
- Promotional offers such as rebates, bundles, or “buy one, get one free” are excluded.
- Auction sites and discount marketplaces (e.g., eBay) do not qualify.
- The competitor must be an authorized retailer of the product in question.
- Price comparisons are based on the total order cost, including product price, sales tax, and shipping.
- Price matching is not available for exchanges, replacements, or warranty claims.
Please Note: Some Exclusions May Apply
Refunds and Returns Policy
We know things don’t always go as planned. Whether you received the wrong item or need to send something back, our return process is here to keep things simple. Here's what you need to know:
Return Timeframe
You may request a return within 30 days of receiving your order. Please reach out within that window to ensure eligibility.
Return Eligibility Criteria
To be considered for a return:
- Items must be unused and in original condition
- All tags and packaging must be intact
- A receipt or order confirmation is required
Products that arrive used, installed, or altered will not qualify for a return.
How to Request a Return
Email our support team at support@servicesupplydepot.com to begin the return process. We’ll respond with detailed return instructions and the appropriate return address.
Please do not return items without contacting us first. Unauthorized returns will not be accepted.
Shipping Costs for Returns
If your order arrived damaged or we sent the wrong item—we’ve got you covered. We’ll take care of the return shipping cost.
If you're returning something because you changed your mind or ordered the wrong item, we kindly ask that you cover the return shipping
Do you have a restocking fee?
Yes, we charge a 25% restocking fee. This fee covers inspection, repackaging, and restocking logistics.
Return Method
All returns must be shipped back to us—we do not accept in-person or drop-off returns.
Return Labels
For defective or damaged items, please get in touch with us and we’ll email you a prepaid return label. Simply download, print, and attach the label to your return package.
Refunds
Once your return arrives and passes inspection, we’ll notify you via email. If the return is approved, your refund will be issued to the original payment method within 3–5 business days.
Refund Not Received?
If it’s been more than 5 business days since your refund approval:
- Recheck your bank account
- Contact your card provider
- Check with your bank for processing times
Still waiting? Reach out to us at support@servicesupplydepot.com and we’ll investigate.
Order Issues & Damaged Shipments
We ask that you inspect your shipment upon delivery. If anything arrives broken, incorrect, or incomplete, contact us immediately so we can resolve the issue without delay.
Product Exchanges
We only offer exchanges for products that are damaged or defective. If you need a replacement for the same item, contact us at support@servicesupplydepot.com and we’ll get you set up.
Shipping Address Changes
If you need to update the shipping address for an order, please notify us within 24 hours of placing your order. Once processing begins, address changes are not guaranteed.
Description
True Refrigeration T-72-HC Description
The True T-72-HC three-section refrigerator is built with a powerful compressor and large evaporator and condenser coils to maintain cabinet temperatures between 33 and 38 degrees Fahrenheit. A self-contained capillary tube system in the unit holds and controls the flow of R290 hydrocarbon refrigerant. For movement, 4-inch-diameter stem castors are bottom mounted and the front set locks for stability. Each door has a magnetic gasket that snaps into the frame to prevent cold air from seeping out.
Reversing for 20 seconds when the compressor turns on, the fan motor helps remove buildup of debris, dust, and dirt to maintain a clean condensing coil. This mechanism helps it operate more efficiently over time, using less energy overall. Despite its effectiveness, users should continue to implement preventative maintenance for the coil.
The equipment's condensing unit is located in the bottom of the cabinet, so critical components are accessible for cleaning and maintenance. A bottom-mounted condensing unit also means the unit runs in the coolest part of the kitchen where it is less likely to capture airborne grease. For energy-efficiency, the True T-72-HC reach-in refrigerator is insulated with foamed-in-place polyurethane insulation.
Product Details
- Self-contained capillary tube system uses R290 hydrocarbon refrigerant
- Temperature range: 33-38 degrees F
- Powerful horsepower compressor is balanced with a large condenser and evaporator coils for quick temperature recovery
- Compressor fan motor blows in a reverse direction to clean condensing coil
- Large evaporator fans powered by sealed, self-lubricating, cast iron motors move air through cabinet consistently for even temperatures
- Bottom-mounted condensing unit is accessible for cleaning and maintenance
- 4-in.-dia. stem castors enable the unit to be wheeled out for cleaning underneath
- 9 gray PVC-coated wire shelves are included
- Each shelf mounts on 4 chrome-plated clips and is adjustable along support pilaster on 1⁄2-in. increments
- Cabinet interior is illuminated with incandescent lighting, which is safety-shielded for break protection
- Exterior temperature display shows internal temperatures
- Epoxy-coated evaporator is corrosion protection
Durable Doors and Cabinet
- Finished with durable stainless steel fronts
- Interiors are lined with durable, clear-coated aluminum to simplify cleaning
- Cabinet ends, back, and top are finished in anodized aluminum
- Interior floor is made of stainless steel with coved corners
- Cabinet structure is insulated with foamed-in-place polyurethane
- Heavy-duty steel frame rail is powder-coated black for rust resistance
- 12-in. recessed door handles are attached with a sheet metal interlock to ensure they stay permanently attached
- Doors are self-closing to prevent cool air loss
- Door gaskets snap into place with magnets and are removable without tools for cleaning
Dimensions & Utilities
- Shelves: 241⁄8 in. W x 223⁄8 in. D
- Overall: 781⁄8 in. W x 291⁄2 in. D x 835⁄16 in. H
- 6.9 A, 3⁄4 HP
- 115 V/60 Hz/1 ph, 9-ft. cord with a NEMA 5-15P plug
True Refrigeration T-72-HC Specifications
Spec Attribute | Spec Value |
---|---|
Manufacturer | True Refrigeration |
Additional Info | Contact Customer Service for Additional Information |
Color | Silver |
Compressor Location | Bottom |
Cubic Feet | 72 |
Depth (in) | 29.5 |
Door Type | Solid |
Doors | Full |
Evaporator Type | Capillary Tube |
Height (in) | 78.38 |
Hertz | 60 |
Hinge Configuration | Left/Right |
Interior Material | Aluminum |
NEMA | 5-15P |
No. of Doors | 3 |
Phase | 1 |
Product | Reach-In Refrigerators |
Product Type | Commercial Refrigeration |
Rating | Better |
Refrigerant | R290 (Hydrocarbon) |
Sections | 3 |
Series | T Series |
Supports | Casters |
Thermometer Type | Digital |
Type | Reach In |
Voltage | 115 |
Warranty | 3 year parts & labor; 7 year compressor |
Width (in) | 78.13 |
Number of Shelves | 9 |
Weight | 575.00 |
Delivery Information
We typically process orders within 1 to 2 days. Please be aware that the deadline for placing orders is 5 p.m. Orders submitted after this time will be processed the next business day.
Shipping Information:
Expect your order to arrive in 4 to 7 days, and we offer free shipping. Please note that we currently only ship within the United States. International shipping is not available.
The majority of our orders are dispatched via third-party freight carriers (18-wheelers). In case your order includes an item that requires freight shipping, we will contact you to schedule a curbside delivery. Ensure that your contact number is correct at checkout.
Order Confirmation and Payment:
After you place your order, a confirmation email will be sent to you. This confirms that your order is registered in our system and your credit card is authorized for the purchase.
Your card will be charged only when the item is shipped. For backordered items, we might hold a charge to reserve the product for you. As soon as we receive your order, we begin processing it immediately!
Price Match Guarantee
Our 100% Price Match Guarantee has the following restrictions:
- Promotional offers such as rebates, bundles, or “buy one, get one free” are excluded.
- Auction sites and discount marketplaces (e.g., eBay) do not qualify.
- The competitor must be an authorized retailer of the product in question.
- Price comparisons are based on the total order cost, including product price, sales tax, and shipping.
- Price matching is not available for exchanges, replacements, or warranty claims.
Please Note: Some Exclusions May Apply
Returns
Refunds and Returns Policy
We know things don’t always go as planned. Whether you received the wrong item or need to send something back, our return process is here to keep things simple. Here's what you need to know:
Return Timeframe
You may request a return within 30 days of receiving your order. Please reach out within that window to ensure eligibility.
Return Eligibility Criteria
To be considered for a return:
- Items must be unused and in original condition
- All tags and packaging must be intact
- A receipt or order confirmation is required
Products that arrive used, installed, or altered will not qualify for a return.
How to Request a Return
Email our support team at support@servicesupplydepot.com to begin the return process. We’ll respond with detailed return instructions and the appropriate return address.
Please do not return items without contacting us first. Unauthorized returns will not be accepted.
Shipping Costs for Returns
If your order arrived damaged or we sent the wrong item—we’ve got you covered. We’ll take care of the return shipping cost.
If you're returning something because you changed your mind or ordered the wrong item, we kindly ask that you cover the return shipping
Do you have a restocking fee?
Yes, we charge a 25% restocking fee. This fee covers inspection, repackaging, and restocking logistics.
Return Method
All returns must be shipped back to us—we do not accept in-person or drop-off returns.
Return Labels
For defective or damaged items, please get in touch with us and we’ll email you a prepaid return label. Simply download, print, and attach the label to your return package.
Refunds
Once your return arrives and passes inspection, we’ll notify you via email. If the return is approved, your refund will be issued to the original payment method within 3–5 business days.
Refund Not Received?
If it’s been more than 5 business days since your refund approval:
- Recheck your bank account
- Contact your card provider
- Check with your bank for processing times
Still waiting? Reach out to us at support@servicesupplydepot.com and we’ll investigate.
Order Issues & Damaged Shipments
We ask that you inspect your shipment upon delivery. If anything arrives broken, incorrect, or incomplete, contact us immediately so we can resolve the issue without delay.
Product Exchanges
We only offer exchanges for products that are damaged or defective. If you need a replacement for the same item, contact us at support@servicesupplydepot.com and we’ll get you set up.
Shipping Address Changes
If you need to update the shipping address for an order, please notify us within 24 hours of placing your order. Once processing begins, address changes are not guaranteed.

Hopper Size