The Cleveland DuraPan Series SGL40TR is a 40-gallon (156-liter) gas-powered tilting braising pan with an open-base design and standard hydraulic hand tilt. Its stainless steel pan features coved corners and gallon and liter markings, while the 5/8-inch stainless steel-clad cooking surface provides even heat distribution and is guaranteed against warping.
This tilting skillet uses a high-efficiency 130,000 BTU/hr gas heating system with an adjustable electronic thermostat that controls temperatures from 100–425°F. It also features electronic spark ignition, splash-proof controls, a spring-assisted cover with an adjustable vent, and a hydraulic tilt system with a quick-lowering feature for controlled product discharge.
Key Features
- DuraPan Series gas tilting braising pan
- 40-gallon (156-liter) capacity
- Open-base design
- Standard hydraulic hand tilt
- Quick-lowering tilt feature
- High-efficiency gas heating system
- 130,000 BTU/hr heating capacity
- Even heat distribution
- Adjustable electronic thermostat
- Temperature range of 100–425°F
- Electronic spark ignition
- Approximately 11-minute preheat time
- Approximately 60 minutes to heat a full cold load to boiling
- Stainless steel-clad 5/8-inch cooking surface
- Cooking surface guaranteed against warping
- Bead-blasted cooking surface
- Stainless steel pan with coved corners
- Gallon and liter capacity markings
- Full capacity measured to the bottom of the pouring lip
- Anti-splash pouring lip
- Spring-assisted cover
- Adjustable cover vent
- Full-width cover handle
- Recessed ON/OFF switch
- Recessed thermostat control
- Green power indicator light
- Amber temperature-cycling indicator light
- Splash-proof controls
- Watertight electrical connections
- IPX6 water-resistance rating
- High-limit safety device set at 475°F / 246°C
- All-stainless-steel construction
- Four adjustable stainless steel feet
- Rear feet flanged for floor bolting
- Front-serviceable controls
- Natural gas or LP gas configurations available
- 120V control circuit
- Supplied with a 6-foot cord and plug
- Optional power tilt with hand-tilt override
- Optional 2-inch tangent draw-off valve
- Optional food strainer
- Optional pantry faucet
- Optional skillet filler
- Optional pre-rinse spray head
- Optional sliding drain drawer with splash screen
- Optional vegetable steamer and poaching pan accessories
- Typical approvals include AGA, CSA, CE, and NSF
Specifications
| Specification | Details |
|---|---|
| Series | DuraPan Series |
| Capacity | 40 gallons / 156 liters |
| Base Configuration | Open base |
| Tilt System | Hydraulic hand tilt with quick-lowering feature |
| Heating Capacity | 130,000 BTU/hr |
| Temperature Range | 100–425°F |
| Temperature Control | Adjustable electronic thermostat |
| Ignition System | Electronic spark ignition |
| Cooking Surface | 5/8-inch stainless steel-clad, bead-blasted surface |
| Pan Construction | Stainless steel with coved corners |
| Exterior Construction | Stainless steel |
| Capacity Markings | Gallon and liter markings |
| Cover | Spring assisted with adjustable vent and full-width handle |
| Pouring Lip | Anti-splash design |
| Indicator Lights | Green power indicator and amber temperature-cycling indicator |
| Water-Resistance Rating | IPX6 |
| High-Limit Safety Setting | 475°F / 246°C |
| Standard Gas Type | Natural gas |
| Optional Gas Type | LP gas |
| Gas Connection | 3/4-inch NPT |
| Natural Gas Supply Pressure | Minimum 5 inches W.C. |
| LP Gas Supply Pressure | Minimum 11 inches W.C. |
| Control Voltage | 120V |
| Frequency | 60Hz |
| Phase | Single phase |
| Current Draw | 1.8 amps |
| Electrical Connection | 6-foot cord and plug |
| Width | 48 inches / 1,220 mm |
| Depth | 37 inches / 940 mm |
| Height | 42 inches / 1,067 mm |
| Pan Surface Height | 35 inches / 889 mm |
| Cover-Open Height | 72 inches / 1,829 mm |
| Combustible-Surface Clearance | 0 inches at sides; 6 inches at rear |
| Noncombustible-Surface Clearance | 0 inches at sides and rear |
| Listed Weight | 622 lb / approximately 282 kg |
Gallery
Product Support
We typically process orders within 1 to 2 days. Please be aware that the deadline for placing orders is 5 p.m. Orders submitted after this time will be processed the next business day.
Shipping Information:
Expect your order to arrive in 4 to 7 days, and we offer free shipping. Please note that we currently only ship within the United States. International shipping is not available.
The majority of our orders are dispatched via third-party freight carriers (18-wheelers). In case your order includes an item that requires freight shipping, we will contact you to schedule a curbside delivery. Ensure that your contact number is correct at checkout.
Order Confirmation and Payment:
After you place your order, a confirmation email will be sent to you. This confirms that your order is registered in our system and your credit card is authorized for the purchase.
Your card will be charged only when the item is shipped. For backordered items, we might hold a charge to reserve the product for you. As soon as we receive your order, we begin processing it immediately!
Our 100% Price Match Guarantee has the following restrictions:
- Promotional offers such as rebates, bundles, or “buy one, get one free” are excluded.
- Auction sites and discount marketplaces (e.g., eBay) do not qualify.
- The competitor must be an authorized retailer of the product in question.
- Price comparisons are based on the total order cost, including product price, sales tax, and shipping.
- Price matching is not available for exchanges, replacements, or warranty claims.
Please Note: Some Exclusions May Apply
Refunds and Returns Policy
We know things don’t always go as planned. Whether you received the wrong item or need to send something back, our return process is here to keep things simple. Here's what you need to know:
Return Timeframe
You may request a return within 30 days of receiving your order. Please reach out within that window to ensure eligibility.
Return Eligibility Criteria
To be considered for a return:
- Items must be unused and in original condition
- All tags and packaging must be intact
- A receipt or order confirmation is required
Products that arrive used, installed, or altered will not qualify for a return.
How to Request a Return
Email our support team at support@servicesupplydepot.com to begin the return process. We’ll respond with detailed return instructions and the appropriate return address.
Please do not return items without contacting us first. Unauthorized returns will not be accepted.
Shipping Costs for Returns
If your order arrived damaged or we sent the wrong item—we’ve got you covered. We’ll take care of the return shipping cost.
If you're returning something because you changed your mind or ordered the wrong item, we kindly ask that you cover the return shipping
Do you have a restocking fee?
Yes, we charge a 25% restocking fee. This fee covers inspection, repackaging, and restocking logistics.
Return Method
All returns must be shipped back to us—we do not accept in-person or drop-off returns.
Return Labels
For defective or damaged items, please get in touch with us and we’ll email you a prepaid return label. Simply download, print, and attach the label to your return package.
Refunds
Once your return arrives and passes inspection, we’ll notify you via email. If the return is approved, your refund will be issued to the original payment method within 3–5 business days.
Refund Not Received?
If it’s been more than 5 business days since your refund approval:
- Recheck your bank account
- Contact your card provider
- Check with your bank for processing times
Still waiting? Reach out to us at support@servicesupplydepot.com and we’ll investigate.
Order Issues & Damaged Shipments
We ask that you inspect your shipment upon delivery. If anything arrives broken, incorrect, or incomplete, contact us immediately so we can resolve the issue without delay.
Product Exchanges
We only offer exchanges for products that are damaged or defective. If you need a replacement for the same item, contact us at support@servicesupplydepot.com and we’ll get you set up.
Shipping Address Changes
If you need to update the shipping address for an order, please notify us within 24 hours of placing your order. Once processing begins, address changes are not guaranteed.
Description
The Cleveland DuraPan Series SGL40TR is a 40-gallon (156-liter) gas-powered tilting braising pan with an open-base design and standard hydraulic hand tilt. Its stainless steel pan features coved corners and gallon and liter markings, while the 5/8-inch stainless steel-clad cooking surface provides even heat distribution and is guaranteed against warping.
This tilting skillet uses a high-efficiency 130,000 BTU/hr gas heating system with an adjustable electronic thermostat that controls temperatures from 100–425°F. It also features electronic spark ignition, splash-proof controls, a spring-assisted cover with an adjustable vent, and a hydraulic tilt system with a quick-lowering feature for controlled product discharge.
Key Features
- DuraPan Series gas tilting braising pan
- 40-gallon (156-liter) capacity
- Open-base design
- Standard hydraulic hand tilt
- Quick-lowering tilt feature
- High-efficiency gas heating system
- 130,000 BTU/hr heating capacity
- Even heat distribution
- Adjustable electronic thermostat
- Temperature range of 100–425°F
- Electronic spark ignition
- Approximately 11-minute preheat time
- Approximately 60 minutes to heat a full cold load to boiling
- Stainless steel-clad 5/8-inch cooking surface
- Cooking surface guaranteed against warping
- Bead-blasted cooking surface
- Stainless steel pan with coved corners
- Gallon and liter capacity markings
- Full capacity measured to the bottom of the pouring lip
- Anti-splash pouring lip
- Spring-assisted cover
- Adjustable cover vent
- Full-width cover handle
- Recessed ON/OFF switch
- Recessed thermostat control
- Green power indicator light
- Amber temperature-cycling indicator light
- Splash-proof controls
- Watertight electrical connections
- IPX6 water-resistance rating
- High-limit safety device set at 475°F / 246°C
- All-stainless-steel construction
- Four adjustable stainless steel feet
- Rear feet flanged for floor bolting
- Front-serviceable controls
- Natural gas or LP gas configurations available
- 120V control circuit
- Supplied with a 6-foot cord and plug
- Optional power tilt with hand-tilt override
- Optional 2-inch tangent draw-off valve
- Optional food strainer
- Optional pantry faucet
- Optional skillet filler
- Optional pre-rinse spray head
- Optional sliding drain drawer with splash screen
- Optional vegetable steamer and poaching pan accessories
- Typical approvals include AGA, CSA, CE, and NSF
Specifications
| Specification | Details |
|---|---|
| Series | DuraPan Series |
| Capacity | 40 gallons / 156 liters |
| Base Configuration | Open base |
| Tilt System | Hydraulic hand tilt with quick-lowering feature |
| Heating Capacity | 130,000 BTU/hr |
| Temperature Range | 100–425°F |
| Temperature Control | Adjustable electronic thermostat |
| Ignition System | Electronic spark ignition |
| Cooking Surface | 5/8-inch stainless steel-clad, bead-blasted surface |
| Pan Construction | Stainless steel with coved corners |
| Exterior Construction | Stainless steel |
| Capacity Markings | Gallon and liter markings |
| Cover | Spring assisted with adjustable vent and full-width handle |
| Pouring Lip | Anti-splash design |
| Indicator Lights | Green power indicator and amber temperature-cycling indicator |
| Water-Resistance Rating | IPX6 |
| High-Limit Safety Setting | 475°F / 246°C |
| Standard Gas Type | Natural gas |
| Optional Gas Type | LP gas |
| Gas Connection | 3/4-inch NPT |
| Natural Gas Supply Pressure | Minimum 5 inches W.C. |
| LP Gas Supply Pressure | Minimum 11 inches W.C. |
| Control Voltage | 120V |
| Frequency | 60Hz |
| Phase | Single phase |
| Current Draw | 1.8 amps |
| Electrical Connection | 6-foot cord and plug |
| Width | 48 inches / 1,220 mm |
| Depth | 37 inches / 940 mm |
| Height | 42 inches / 1,067 mm |
| Pan Surface Height | 35 inches / 889 mm |
| Cover-Open Height | 72 inches / 1,829 mm |
| Combustible-Surface Clearance | 0 inches at sides; 6 inches at rear |
| Noncombustible-Surface Clearance | 0 inches at sides and rear |
| Listed Weight | 622 lb / approximately 282 kg |
Gallery
Product Support
Delivery Information
We typically process orders within 1 to 2 days. Please be aware that the deadline for placing orders is 5 p.m. Orders submitted after this time will be processed the next business day.
Shipping Information:
Expect your order to arrive in 4 to 7 days, and we offer free shipping. Please note that we currently only ship within the United States. International shipping is not available.
The majority of our orders are dispatched via third-party freight carriers (18-wheelers). In case your order includes an item that requires freight shipping, we will contact you to schedule a curbside delivery. Ensure that your contact number is correct at checkout.
Order Confirmation and Payment:
After you place your order, a confirmation email will be sent to you. This confirms that your order is registered in our system and your credit card is authorized for the purchase.
Your card will be charged only when the item is shipped. For backordered items, we might hold a charge to reserve the product for you. As soon as we receive your order, we begin processing it immediately!
Price Match Guarantee
Our 100% Price Match Guarantee has the following restrictions:
- Promotional offers such as rebates, bundles, or “buy one, get one free” are excluded.
- Auction sites and discount marketplaces (e.g., eBay) do not qualify.
- The competitor must be an authorized retailer of the product in question.
- Price comparisons are based on the total order cost, including product price, sales tax, and shipping.
- Price matching is not available for exchanges, replacements, or warranty claims.
Please Note: Some Exclusions May Apply
Returns
Refunds and Returns Policy
We know things don’t always go as planned. Whether you received the wrong item or need to send something back, our return process is here to keep things simple. Here's what you need to know:
Return Timeframe
You may request a return within 30 days of receiving your order. Please reach out within that window to ensure eligibility.
Return Eligibility Criteria
To be considered for a return:
- Items must be unused and in original condition
- All tags and packaging must be intact
- A receipt or order confirmation is required
Products that arrive used, installed, or altered will not qualify for a return.
How to Request a Return
Email our support team at support@servicesupplydepot.com to begin the return process. We’ll respond with detailed return instructions and the appropriate return address.
Please do not return items without contacting us first. Unauthorized returns will not be accepted.
Shipping Costs for Returns
If your order arrived damaged or we sent the wrong item—we’ve got you covered. We’ll take care of the return shipping cost.
If you're returning something because you changed your mind or ordered the wrong item, we kindly ask that you cover the return shipping
Do you have a restocking fee?
Yes, we charge a 25% restocking fee. This fee covers inspection, repackaging, and restocking logistics.
Return Method
All returns must be shipped back to us—we do not accept in-person or drop-off returns.
Return Labels
For defective or damaged items, please get in touch with us and we’ll email you a prepaid return label. Simply download, print, and attach the label to your return package.
Refunds
Once your return arrives and passes inspection, we’ll notify you via email. If the return is approved, your refund will be issued to the original payment method within 3–5 business days.
Refund Not Received?
If it’s been more than 5 business days since your refund approval:
- Recheck your bank account
- Contact your card provider
- Check with your bank for processing times
Still waiting? Reach out to us at support@servicesupplydepot.com and we’ll investigate.
Order Issues & Damaged Shipments
We ask that you inspect your shipment upon delivery. If anything arrives broken, incorrect, or incomplete, contact us immediately so we can resolve the issue without delay.
Product Exchanges
We only offer exchanges for products that are damaged or defective. If you need a replacement for the same item, contact us at support@servicesupplydepot.com and we’ll get you set up.
Shipping Address Changes
If you need to update the shipping address for an order, please notify us within 24 hours of placing your order. Once processing begins, address changes are not guaranteed.
Allavino - 24" Wide FlexCount II Tru-Vino 172 Bottle Dual Zone Black Wine Refrigerator
Refrigerator Configuration
Allavino - 24" Wide FlexCount II Tru-Vino 177 Bottle Single Zone Wine Refrigerator
Refrigerator Configuration
Allavino - FlexCount Series 349 Bottle Three Zone Tall Side-by-Side Wine Refrigerator
Number of Wine Zones
Allavino - FlexCount Series Side-by-Side Built-in Wine Refrigerators with Black Doors
Number of Wine Zones
Allavino - FlexCount Series tall side-by-side wine refrigerator Stainless Steel Doors
Number of Wine Zones