The Cleveland SteamCraft® Ultra 10 is a two-compartment floor-model pressureless convection steamer designed for high-volume commercial foodservice operations. It accommodates up to ten 12" x 20" x 2-1/2" deep steam table pans, with five pans held in each cooking compartment.
A single rear-mounted PowerPak gas-fired atmospheric steam generator supplies both compartments with up to 125,000 BTU of input. When only one compartment is operating, the generator uses 75,000 BTU. Its 7.5-gallon generator reservoir, automatic water fill, electronic spark ignition, instant steam standby mode, and automatic drain system support efficient cooking and routine operation.
The steamer also features independent compartment controls, high-velocity brass steam jets, cold-water condensers, removable stainless steel slide racks, and insulated cooking compartments. Its two-piece compartment doors have free-floating inner panels, reversible gaskets, and a slam/latch mechanism for a secure seal.
Key Features
- SteamCraft® Ultra 10 series
- Two-compartment floor-model configuration
- Pressureless convection steaming
- Holds up to ten 12" x 20" x 2-1/2" deep steam table pans
- Five-pan capacity per compartment
- Single rear-mounted gas-fired atmospheric steam generator
- 125,000 BTU input when operating both compartments
- 75,000 BTU input when operating one compartment
- PowerPak vertical atmospheric generator design
- 80% efficient generator
- 7.5-gallon generator reservoir
- Fully insulated steam generator
- Instant steam standby mode
- Automatic generator water fill
- Pilotless electronic spark ignition
- Automatic generator drain
- Water Jet spray-rinse drain cleaning cycle
- External top-mounted generator cleaning port
- Remote automatic probe-type water-level control
- High-velocity probe-rinse cycle helps reduce mineral buildup
- EasyTimer with 99-minute digital readout
- SureCook load-compensating timer
- Manual constant-steam mode
- LED descale indicator
- Independent cooking controls for each compartment
- Brass steam jets produce convection steam without fans
- Coved cooking compartment corners for even steam distribution and easier cleaning
- Cold-water condenser for each compartment
- Fully insulated cooking compartments
- Removable stainless steel slide racks
- Two-piece cool-to-the-touch compartment doors
- Free-floating inner doors with reversible gaskets
- Stainless steel slam/latch door mechanism
- Left-hand door hinging with controls on the right
- Field-reversible door hinging
- Steam cutoff switch
- Condensate drip trough below the lower compartment door
- 6-inch adjustable stainless steel legs with flanged feet
- Propane gas option available
- CSA and UL/NSF #4 compliant
Specifications
| Specification | Details |
|---|---|
| Series | SteamCraft® Ultra 10 |
| Pan Capacity | Up to ten 12" x 20" x 2-1/2" deep steam table pans |
| Compartment Capacity | Five pans per compartment |
| Number of Compartments | 2 |
| Generator Configuration | Single large-capacity atmospheric steam generator |
| Generator Reservoir | 7.5 gallons |
| Fuel | Natural gas |
| Gas Input, Two Compartments | 125,000 BTU |
| Gas Input, One Compartment | 75,000 BTU |
| Generator Efficiency | 80% |
| Gas Connection | 3/4 in |
| Natural Gas Supply Pressure | 4.0" W.C. minimum; 14.0" W.C. maximum |
| Electrical Requirements | 120V, single phase |
| Electrical Load | 200 watts / 2.0 amps |
| Water Pressure | 35 PSI minimum; 60 PSI maximum |
| Water Connection | 3/4" NH-F garden hose thread |
| Drain Connection | 1-1/2" IPS-M |
| Width | 24 in |
| Depth | 33 in |
| Height | 65.5 in |
| Shipping Weight | 540 lb |
| Shipping Dimensions | 49" W x 41" D x 78" H |
| Leg Height | 6 in |
| Right-Side Clearance | 3 in |
| Left-Side Clearance | 3 in |
| Rear Clearance | 3 in |
| Door Hinging | Left-hand standard; field reversible |
| Exterior and Compartments | Type 430 stainless steel |
| Door, Cavity and Generator Construction | 14-gauge stainless steel |
| Controls | EasyTimer with digital readout, load compensation and manual constant-steam mode |
| Water-Level Control | Remote automatic probe-type control |
| Approvals | CSA and UL/NSF #4 |
Gallery
Product Support
Order Processing Time:
We typically process orders within 1 to 2 days. Please be aware that the deadline for placing orders is 5 p.m. Orders submitted after this time will be processed the next business day.
Shipping Information:
Expect your order to arrive in 4 to 7 days, and we offer free shipping. Please note that we currently only ship within the United States. International shipping is not available.
The majority of our orders are dispatched via third-party freight carriers (18-wheelers). In case your order includes an item that requires freight shipping, we will contact you to schedule a curbside delivery. Ensure that your contact number is correct at checkout.
Order Confirmation and Payment:
After you place your order, a confirmation email will be sent to you. This confirms that your order is registered in our system and your credit card is authorized for the purchase.
Your card will be charged only when the item is shipped. For backordered items, we might hold a charge to reserve the product for you. As soon as we receive your order, we begin processing it immediately!
We typically process orders within 1 to 2 days. Please be aware that the deadline for placing orders is 5 p.m. Orders submitted after this time will be processed the next business day.
Shipping Information:
Expect your order to arrive in 4 to 7 days, and we offer free shipping. Please note that we currently only ship within the United States. International shipping is not available.
The majority of our orders are dispatched via third-party freight carriers (18-wheelers). In case your order includes an item that requires freight shipping, we will contact you to schedule a curbside delivery. Ensure that your contact number is correct at checkout.
Order Confirmation and Payment:
After you place your order, a confirmation email will be sent to you. This confirms that your order is registered in our system and your credit card is authorized for the purchase.
Your card will be charged only when the item is shipped. For backordered items, we might hold a charge to reserve the product for you. As soon as we receive your order, we begin processing it immediately!
We are committed to offering highly competitive pricing across our entire catalog. If you find the same item at a lower price from another qualifying online retailer, we will beat that price to ensure you receive the best possible value.
Our 100% Price Match Guarantee has the following restrictions:
Please Note: Some Exclusions May Apply
Our 100% Price Match Guarantee has the following restrictions:
- Promotional offers such as rebates, bundles, or “buy one, get one free” are excluded.
- Auction sites and discount marketplaces (e.g., eBay) do not qualify.
- The competitor must be an authorized retailer of the product in question.
- Price comparisons are based on the total order cost, including product price, sales tax, and shipping.
- Price matching is not available for exchanges, replacements, or warranty claims.
Please Note: Some Exclusions May Apply
Refunds and Returns Policy
We know things don’t always go as planned. Whether you received the wrong item or need to send something back, our return process is here to keep things simple. Here's what you need to know:
Return Timeframe
You may request a return within 30 days of receiving your order. Please reach out within that window to ensure eligibility.
Return Eligibility Criteria
To be considered for a return:
- Items must be unused and in original condition
- All tags and packaging must be intact
- A receipt or order confirmation is required
Products that arrive used, installed, or altered will not qualify for a return.
How to Request a Return
Email our support team at support@servicesupplydepot.com to begin the return process. We’ll respond with detailed return instructions and the appropriate return address.
Please do not return items without contacting us first. Unauthorized returns will not be accepted.
Shipping Costs for Returns
If your order arrived damaged or we sent the wrong item—we’ve got you covered. We’ll take care of the return shipping cost.
If you're returning something because you changed your mind or ordered the wrong item, we kindly ask that you cover the return shipping
Do you have a restocking fee?
Yes, we charge a 25% restocking fee. This fee covers inspection, repackaging, and restocking logistics.
Return Method
All returns must be shipped back to us—we do not accept in-person or drop-off returns.
Return Labels
For defective or damaged items, please get in touch with us and we’ll email you a prepaid return label. Simply download, print, and attach the label to your return package.
Refunds
Once your return arrives and passes inspection, we’ll notify you via email. If the return is approved, your refund will be issued to the original payment method within 3–5 business days.
Refund Not Received?
If it’s been more than 5 business days since your refund approval:
- Recheck your bank account
- Contact your card provider
- Check with your bank for processing times
Still waiting? Reach out to us at support@servicesupplydepot.com and we’ll investigate.
Order Issues & Damaged Shipments
We ask that you inspect your shipment upon delivery. If anything arrives broken, incorrect, or incomplete, contact us immediately so we can resolve the issue without delay.
Product Exchanges
We only offer exchanges for products that are damaged or defective. If you need a replacement for the same item, contact us at support@servicesupplydepot.com and we’ll get you set up.
Shipping Address Changes
If you need to update the shipping address for an order, please notify us within 24 hours of placing your order. Once processing begins, address changes are not guaranteed.
Description
The Cleveland SteamCraft® Ultra 10 is a two-compartment floor-model pressureless convection steamer designed for high-volume commercial foodservice operations. It accommodates up to ten 12" x 20" x 2-1/2" deep steam table pans, with five pans held in each cooking compartment.
A single rear-mounted PowerPak gas-fired atmospheric steam generator supplies both compartments with up to 125,000 BTU of input. When only one compartment is operating, the generator uses 75,000 BTU. Its 7.5-gallon generator reservoir, automatic water fill, electronic spark ignition, instant steam standby mode, and automatic drain system support efficient cooking and routine operation.
The steamer also features independent compartment controls, high-velocity brass steam jets, cold-water condensers, removable stainless steel slide racks, and insulated cooking compartments. Its two-piece compartment doors have free-floating inner panels, reversible gaskets, and a slam/latch mechanism for a secure seal.
Key Features
- SteamCraft® Ultra 10 series
- Two-compartment floor-model configuration
- Pressureless convection steaming
- Holds up to ten 12" x 20" x 2-1/2" deep steam table pans
- Five-pan capacity per compartment
- Single rear-mounted gas-fired atmospheric steam generator
- 125,000 BTU input when operating both compartments
- 75,000 BTU input when operating one compartment
- PowerPak vertical atmospheric generator design
- 80% efficient generator
- 7.5-gallon generator reservoir
- Fully insulated steam generator
- Instant steam standby mode
- Automatic generator water fill
- Pilotless electronic spark ignition
- Automatic generator drain
- Water Jet spray-rinse drain cleaning cycle
- External top-mounted generator cleaning port
- Remote automatic probe-type water-level control
- High-velocity probe-rinse cycle helps reduce mineral buildup
- EasyTimer with 99-minute digital readout
- SureCook load-compensating timer
- Manual constant-steam mode
- LED descale indicator
- Independent cooking controls for each compartment
- Brass steam jets produce convection steam without fans
- Coved cooking compartment corners for even steam distribution and easier cleaning
- Cold-water condenser for each compartment
- Fully insulated cooking compartments
- Removable stainless steel slide racks
- Two-piece cool-to-the-touch compartment doors
- Free-floating inner doors with reversible gaskets
- Stainless steel slam/latch door mechanism
- Left-hand door hinging with controls on the right
- Field-reversible door hinging
- Steam cutoff switch
- Condensate drip trough below the lower compartment door
- 6-inch adjustable stainless steel legs with flanged feet
- Propane gas option available
- CSA and UL/NSF #4 compliant
Specifications
| Specification | Details |
|---|---|
| Series | SteamCraft® Ultra 10 |
| Pan Capacity | Up to ten 12" x 20" x 2-1/2" deep steam table pans |
| Compartment Capacity | Five pans per compartment |
| Number of Compartments | 2 |
| Generator Configuration | Single large-capacity atmospheric steam generator |
| Generator Reservoir | 7.5 gallons |
| Fuel | Natural gas |
| Gas Input, Two Compartments | 125,000 BTU |
| Gas Input, One Compartment | 75,000 BTU |
| Generator Efficiency | 80% |
| Gas Connection | 3/4 in |
| Natural Gas Supply Pressure | 4.0" W.C. minimum; 14.0" W.C. maximum |
| Electrical Requirements | 120V, single phase |
| Electrical Load | 200 watts / 2.0 amps |
| Water Pressure | 35 PSI minimum; 60 PSI maximum |
| Water Connection | 3/4" NH-F garden hose thread |
| Drain Connection | 1-1/2" IPS-M |
| Width | 24 in |
| Depth | 33 in |
| Height | 65.5 in |
| Shipping Weight | 540 lb |
| Shipping Dimensions | 49" W x 41" D x 78" H |
| Leg Height | 6 in |
| Right-Side Clearance | 3 in |
| Left-Side Clearance | 3 in |
| Rear Clearance | 3 in |
| Door Hinging | Left-hand standard; field reversible |
| Exterior and Compartments | Type 430 stainless steel |
| Door, Cavity and Generator Construction | 14-gauge stainless steel |
| Controls | EasyTimer with digital readout, load compensation and manual constant-steam mode |
| Water-Level Control | Remote automatic probe-type control |
| Approvals | CSA and UL/NSF #4 |
Gallery
Product Support
Delivery Information
Order Processing Time:
We typically process orders within 1 to 2 days. Please be aware that the deadline for placing orders is 5 p.m. Orders submitted after this time will be processed the next business day.
Shipping Information:
Expect your order to arrive in 4 to 7 days, and we offer free shipping. Please note that we currently only ship within the United States. International shipping is not available.
The majority of our orders are dispatched via third-party freight carriers (18-wheelers). In case your order includes an item that requires freight shipping, we will contact you to schedule a curbside delivery. Ensure that your contact number is correct at checkout.
Order Confirmation and Payment:
After you place your order, a confirmation email will be sent to you. This confirms that your order is registered in our system and your credit card is authorized for the purchase.
Your card will be charged only when the item is shipped. For backordered items, we might hold a charge to reserve the product for you. As soon as we receive your order, we begin processing it immediately!
We typically process orders within 1 to 2 days. Please be aware that the deadline for placing orders is 5 p.m. Orders submitted after this time will be processed the next business day.
Shipping Information:
Expect your order to arrive in 4 to 7 days, and we offer free shipping. Please note that we currently only ship within the United States. International shipping is not available.
The majority of our orders are dispatched via third-party freight carriers (18-wheelers). In case your order includes an item that requires freight shipping, we will contact you to schedule a curbside delivery. Ensure that your contact number is correct at checkout.
Order Confirmation and Payment:
After you place your order, a confirmation email will be sent to you. This confirms that your order is registered in our system and your credit card is authorized for the purchase.
Your card will be charged only when the item is shipped. For backordered items, we might hold a charge to reserve the product for you. As soon as we receive your order, we begin processing it immediately!
Price Match Guarantee
We are committed to offering highly competitive pricing across our entire catalog. If you find the same item at a lower price from another qualifying online retailer, we will beat that price to ensure you receive the best possible value.
Our 100% Price Match Guarantee has the following restrictions:
Please Note: Some Exclusions May Apply
Our 100% Price Match Guarantee has the following restrictions:
- Promotional offers such as rebates, bundles, or “buy one, get one free” are excluded.
- Auction sites and discount marketplaces (e.g., eBay) do not qualify.
- The competitor must be an authorized retailer of the product in question.
- Price comparisons are based on the total order cost, including product price, sales tax, and shipping.
- Price matching is not available for exchanges, replacements, or warranty claims.
Please Note: Some Exclusions May Apply
Returns
Refunds and Returns Policy
We know things don’t always go as planned. Whether you received the wrong item or need to send something back, our return process is here to keep things simple. Here's what you need to know:
Return Timeframe
You may request a return within 30 days of receiving your order. Please reach out within that window to ensure eligibility.
Return Eligibility Criteria
To be considered for a return:
- Items must be unused and in original condition
- All tags and packaging must be intact
- A receipt or order confirmation is required
Products that arrive used, installed, or altered will not qualify for a return.
How to Request a Return
Email our support team at support@servicesupplydepot.com to begin the return process. We’ll respond with detailed return instructions and the appropriate return address.
Please do not return items without contacting us first. Unauthorized returns will not be accepted.
Shipping Costs for Returns
If your order arrived damaged or we sent the wrong item—we’ve got you covered. We’ll take care of the return shipping cost.
If you're returning something because you changed your mind or ordered the wrong item, we kindly ask that you cover the return shipping
Do you have a restocking fee?
Yes, we charge a 25% restocking fee. This fee covers inspection, repackaging, and restocking logistics.
Return Method
All returns must be shipped back to us—we do not accept in-person or drop-off returns.
Return Labels
For defective or damaged items, please get in touch with us and we’ll email you a prepaid return label. Simply download, print, and attach the label to your return package.
Refunds
Once your return arrives and passes inspection, we’ll notify you via email. If the return is approved, your refund will be issued to the original payment method within 3–5 business days.
Refund Not Received?
If it’s been more than 5 business days since your refund approval:
- Recheck your bank account
- Contact your card provider
- Check with your bank for processing times
Still waiting? Reach out to us at support@servicesupplydepot.com and we’ll investigate.
Order Issues & Damaged Shipments
We ask that you inspect your shipment upon delivery. If anything arrives broken, incorrect, or incomplete, contact us immediately so we can resolve the issue without delay.
Product Exchanges
We only offer exchanges for products that are damaged or defective. If you need a replacement for the same item, contact us at support@servicesupplydepot.com and we’ll get you set up.
Shipping Address Changes
If you need to update the shipping address for an order, please notify us within 24 hours of placing your order. Once processing begins, address changes are not guaranteed.
Item Added to Your Cart
Customers also bought...
Allavino - 24" Wide FlexCount II Tru-Vino 172 Bottle Dual Zone Black Wine Refrigerator
$1,939.75
Refrigerator Configuration
Allavino - 24" Wide FlexCount II Tru-Vino 177 Bottle Single Zone Wine Refrigerator
$1,939.75
Refrigerator Configuration
Allavino - FlexCount Series 349 Bottle Three Zone Tall Side-by-Side Wine Refrigerator
$3,632.83
Number of Wine Zones
Allavino - FlexCount Series Side-by-Side Built-in Wine Refrigerators with Black Doors
$2,574.08
Number of Wine Zones
Allavino - FlexCount Series tall side-by-side wine refrigerator Stainless Steel Doors
$3,726.33
Number of Wine Zones
Related Products
3
visitors right now
3
visitors have this item in their cart right now
3
people have bought this item
3
% of people buy 2 or more