The Cleveland KET12T is a 12-gallon (45-liter) self-contained electric tilting kettle designed for countertop or equipment-stand installation. Its balanced manual-tilt design and large pouring lip allow prepared food to be discharged in a controlled manner.
This kettle features 2/3 steam-jacketed construction, welded-in electric heating elements, and solid-state temperature controls with an operating range of 145–260°F (63–127°C). The steam jacket is permanently filled with treated water and normally requires no venting or refilling. A self-locking marine-style tilt mechanism helps prevent accidental movement and spills during operation.
Key Features
- 12-gallon (45-liter) capacity
- Self-contained electric operation
- Table-type installation
- Balanced manual-tilting design
- 2/3 steam-jacketed construction
- Designed for high-speed cooking
- Permanently filled steam jacket
- Steam jacket normally requires no venting or refilling
- Welded-in electric heating elements
- Standard solid-state temperature controls
- Operating temperature range of 145–260°F / 63–127°C
- Temperature variance of less than ±1°C
- Power ON/OFF control
- Temperature dial with settings from 1–10
- LED heat-cycle indicator
- LED low-water indicator
- Solid-state water-level control
- Safety control system housed in a plug-in module
- IPX6-rated water-resistant construction
- Splash-proof controls
- Large pouring lip with anti-drip notch
- Reinforced rolled rim
- Type 316 stainless steel kettle and exterior surfaces
- No. 4 stainless steel finish
- Rear-mounted pressure/vacuum gauge
- Color-coded gauge with green and vent-air zones
- Rear-mounted pressure-relief valve
- 50 PSI / 3.5 bar steam-jacket rating
- Self-locking marine-style tilting mechanism
- Standard 208–240V, 60Hz, three-phase configuration
- Field-rewirable for single-phase operation
- Optional easyDial control panel
- Optional core temperature probe
- Optional lift-off cover
- Optional cooking baskets
- Optional food strainer
- Optional measuring strip
- Optional hot-and-cold or cold-only water faucet
- Compatible with the optional ST-28 equipment stand
- Typical approvals include UL, CSA, CE, NSF, ASME, and IPX6
Specifications
| Specification | Details |
|---|---|
| Series | Splash Proof Series |
| Capacity | 12 gallons / 45 liters |
| Serving Capacity | Approximately 352 servings at 4 oz. each |
| Installation | Countertop or compatible equipment stand |
| Steam Jacket Coverage | 2/3 jacketed |
| Steam Jacket Rating | 50 PSI / 3.5 bar |
| Temperature Range | 145–260°F / 63–127°C |
| Temperature Variance | Less than ±1°C |
| Controls | Standard solid-state temperature controls |
| Temperature Adjustment | Power ON/OFF dial with settings from 1–10 |
| Heating Elements | Welded-in electric heating elements |
| Water-Level Control | Solid-state |
| Kettle Material | Type 316 stainless steel |
| Exterior Material | Type 316 stainless steel |
| Finish | No. 4 stainless steel finish |
| Tilt Mechanism | Balanced manual tilt with self-locking marine mechanism |
| Pressure Gauge | Rear-mounted color-coded pressure/vacuum gauge |
| Pressure Relief Valve | Rear mounted |
| Water Resistance Rating | IPX6 |
| Standard Voltage | 208–240V |
| Frequency | 60Hz |
| Standard Phase | Three phase; field-rewirable for single phase |
| Standard Wattage at 208V | 9.8 kW |
| Standard Wattage at 240V | 13.1 kW |
| Current at 208V | 47.2 amps single phase / 27.2 amps three phase |
| Current at 240V | 54.4 amps single phase / 31.4 amps three phase |
| Left Clearance | 0 inches |
| Right Clearance | 0 inches |
| Rear Clearance | 6 inches |
| Listed Weight | 180 lb / 82 kg |
Gallery
Product Support
Order Processing Time:
We typically process orders within 1 to 2 days. Please be aware that the deadline for placing orders is 5 p.m. Orders submitted after this time will be processed the next business day.
Shipping Information:
Expect your order to arrive in 4 to 7 days, and we offer free shipping. Please note that we currently only ship within the United States. International shipping is not available.
The majority of our orders are dispatched via third-party freight carriers (18-wheelers). In case your order includes an item that requires freight shipping, we will contact you to schedule a curbside delivery. Ensure that your contact number is correct at checkout.
Order Confirmation and Payment:
After you place your order, a confirmation email will be sent to you. This confirms that your order is registered in our system and your credit card is authorized for the purchase.
Your card will be charged only when the item is shipped. For backordered items, we might hold a charge to reserve the product for you. As soon as we receive your order, we begin processing it immediately!
We typically process orders within 1 to 2 days. Please be aware that the deadline for placing orders is 5 p.m. Orders submitted after this time will be processed the next business day.
Shipping Information:
Expect your order to arrive in 4 to 7 days, and we offer free shipping. Please note that we currently only ship within the United States. International shipping is not available.
The majority of our orders are dispatched via third-party freight carriers (18-wheelers). In case your order includes an item that requires freight shipping, we will contact you to schedule a curbside delivery. Ensure that your contact number is correct at checkout.
Order Confirmation and Payment:
After you place your order, a confirmation email will be sent to you. This confirms that your order is registered in our system and your credit card is authorized for the purchase.
Your card will be charged only when the item is shipped. For backordered items, we might hold a charge to reserve the product for you. As soon as we receive your order, we begin processing it immediately!
We are committed to offering highly competitive pricing across our entire catalog. If you find the same item at a lower price from another qualifying online retailer, we will beat that price to ensure you receive the best possible value.
Our 100% Price Match Guarantee has the following restrictions:
Please Note: Some Exclusions May Apply
Our 100% Price Match Guarantee has the following restrictions:
- Promotional offers such as rebates, bundles, or “buy one, get one free” are excluded.
- Auction sites and discount marketplaces (e.g., eBay) do not qualify.
- The competitor must be an authorized retailer of the product in question.
- Price comparisons are based on the total order cost, including product price, sales tax, and shipping.
- Price matching is not available for exchanges, replacements, or warranty claims.
Please Note: Some Exclusions May Apply
Refunds and Returns Policy
We know things don’t always go as planned. Whether you received the wrong item or need to send something back, our return process is here to keep things simple. Here's what you need to know:
Return Timeframe
You may request a return within 30 days of receiving your order. Please reach out within that window to ensure eligibility.
Return Eligibility Criteria
To be considered for a return:
- Items must be unused and in original condition
- All tags and packaging must be intact
- A receipt or order confirmation is required
Products that arrive used, installed, or altered will not qualify for a return.
How to Request a Return
Email our support team at support@servicesupplydepot.com to begin the return process. We’ll respond with detailed return instructions and the appropriate return address.
Please do not return items without contacting us first. Unauthorized returns will not be accepted.
Shipping Costs for Returns
If your order arrived damaged or we sent the wrong item—we’ve got you covered. We’ll take care of the return shipping cost.
If you're returning something because you changed your mind or ordered the wrong item, we kindly ask that you cover the return shipping
Do you have a restocking fee?
Yes, we charge a 25% restocking fee. This fee covers inspection, repackaging, and restocking logistics.
Return Method
All returns must be shipped back to us—we do not accept in-person or drop-off returns.
Return Labels
For defective or damaged items, please get in touch with us and we’ll email you a prepaid return label. Simply download, print, and attach the label to your return package.
Refunds
Once your return arrives and passes inspection, we’ll notify you via email. If the return is approved, your refund will be issued to the original payment method within 3–5 business days.
Refund Not Received?
If it’s been more than 5 business days since your refund approval:
- Recheck your bank account
- Contact your card provider
- Check with your bank for processing times
Still waiting? Reach out to us at support@servicesupplydepot.com and we’ll investigate.
Order Issues & Damaged Shipments
We ask that you inspect your shipment upon delivery. If anything arrives broken, incorrect, or incomplete, contact us immediately so we can resolve the issue without delay.
Product Exchanges
We only offer exchanges for products that are damaged or defective. If you need a replacement for the same item, contact us at support@servicesupplydepot.com and we’ll get you set up.
Shipping Address Changes
If you need to update the shipping address for an order, please notify us within 24 hours of placing your order. Once processing begins, address changes are not guaranteed.
Description
The Cleveland KET12T is a 12-gallon (45-liter) self-contained electric tilting kettle designed for countertop or equipment-stand installation. Its balanced manual-tilt design and large pouring lip allow prepared food to be discharged in a controlled manner.
This kettle features 2/3 steam-jacketed construction, welded-in electric heating elements, and solid-state temperature controls with an operating range of 145–260°F (63–127°C). The steam jacket is permanently filled with treated water and normally requires no venting or refilling. A self-locking marine-style tilt mechanism helps prevent accidental movement and spills during operation.
Key Features
- 12-gallon (45-liter) capacity
- Self-contained electric operation
- Table-type installation
- Balanced manual-tilting design
- 2/3 steam-jacketed construction
- Designed for high-speed cooking
- Permanently filled steam jacket
- Steam jacket normally requires no venting or refilling
- Welded-in electric heating elements
- Standard solid-state temperature controls
- Operating temperature range of 145–260°F / 63–127°C
- Temperature variance of less than ±1°C
- Power ON/OFF control
- Temperature dial with settings from 1–10
- LED heat-cycle indicator
- LED low-water indicator
- Solid-state water-level control
- Safety control system housed in a plug-in module
- IPX6-rated water-resistant construction
- Splash-proof controls
- Large pouring lip with anti-drip notch
- Reinforced rolled rim
- Type 316 stainless steel kettle and exterior surfaces
- No. 4 stainless steel finish
- Rear-mounted pressure/vacuum gauge
- Color-coded gauge with green and vent-air zones
- Rear-mounted pressure-relief valve
- 50 PSI / 3.5 bar steam-jacket rating
- Self-locking marine-style tilting mechanism
- Standard 208–240V, 60Hz, three-phase configuration
- Field-rewirable for single-phase operation
- Optional easyDial control panel
- Optional core temperature probe
- Optional lift-off cover
- Optional cooking baskets
- Optional food strainer
- Optional measuring strip
- Optional hot-and-cold or cold-only water faucet
- Compatible with the optional ST-28 equipment stand
- Typical approvals include UL, CSA, CE, NSF, ASME, and IPX6
Specifications
| Specification | Details |
|---|---|
| Series | Splash Proof Series |
| Capacity | 12 gallons / 45 liters |
| Serving Capacity | Approximately 352 servings at 4 oz. each |
| Installation | Countertop or compatible equipment stand |
| Steam Jacket Coverage | 2/3 jacketed |
| Steam Jacket Rating | 50 PSI / 3.5 bar |
| Temperature Range | 145–260°F / 63–127°C |
| Temperature Variance | Less than ±1°C |
| Controls | Standard solid-state temperature controls |
| Temperature Adjustment | Power ON/OFF dial with settings from 1–10 |
| Heating Elements | Welded-in electric heating elements |
| Water-Level Control | Solid-state |
| Kettle Material | Type 316 stainless steel |
| Exterior Material | Type 316 stainless steel |
| Finish | No. 4 stainless steel finish |
| Tilt Mechanism | Balanced manual tilt with self-locking marine mechanism |
| Pressure Gauge | Rear-mounted color-coded pressure/vacuum gauge |
| Pressure Relief Valve | Rear mounted |
| Water Resistance Rating | IPX6 |
| Standard Voltage | 208–240V |
| Frequency | 60Hz |
| Standard Phase | Three phase; field-rewirable for single phase |
| Standard Wattage at 208V | 9.8 kW |
| Standard Wattage at 240V | 13.1 kW |
| Current at 208V | 47.2 amps single phase / 27.2 amps three phase |
| Current at 240V | 54.4 amps single phase / 31.4 amps three phase |
| Left Clearance | 0 inches |
| Right Clearance | 0 inches |
| Rear Clearance | 6 inches |
| Listed Weight | 180 lb / 82 kg |
Gallery
Product Support
Delivery Information
Order Processing Time:
We typically process orders within 1 to 2 days. Please be aware that the deadline for placing orders is 5 p.m. Orders submitted after this time will be processed the next business day.
Shipping Information:
Expect your order to arrive in 4 to 7 days, and we offer free shipping. Please note that we currently only ship within the United States. International shipping is not available.
The majority of our orders are dispatched via third-party freight carriers (18-wheelers). In case your order includes an item that requires freight shipping, we will contact you to schedule a curbside delivery. Ensure that your contact number is correct at checkout.
Order Confirmation and Payment:
After you place your order, a confirmation email will be sent to you. This confirms that your order is registered in our system and your credit card is authorized for the purchase.
Your card will be charged only when the item is shipped. For backordered items, we might hold a charge to reserve the product for you. As soon as we receive your order, we begin processing it immediately!
We typically process orders within 1 to 2 days. Please be aware that the deadline for placing orders is 5 p.m. Orders submitted after this time will be processed the next business day.
Shipping Information:
Expect your order to arrive in 4 to 7 days, and we offer free shipping. Please note that we currently only ship within the United States. International shipping is not available.
The majority of our orders are dispatched via third-party freight carriers (18-wheelers). In case your order includes an item that requires freight shipping, we will contact you to schedule a curbside delivery. Ensure that your contact number is correct at checkout.
Order Confirmation and Payment:
After you place your order, a confirmation email will be sent to you. This confirms that your order is registered in our system and your credit card is authorized for the purchase.
Your card will be charged only when the item is shipped. For backordered items, we might hold a charge to reserve the product for you. As soon as we receive your order, we begin processing it immediately!
Price Match Guarantee
We are committed to offering highly competitive pricing across our entire catalog. If you find the same item at a lower price from another qualifying online retailer, we will beat that price to ensure you receive the best possible value.
Our 100% Price Match Guarantee has the following restrictions:
Please Note: Some Exclusions May Apply
Our 100% Price Match Guarantee has the following restrictions:
- Promotional offers such as rebates, bundles, or “buy one, get one free” are excluded.
- Auction sites and discount marketplaces (e.g., eBay) do not qualify.
- The competitor must be an authorized retailer of the product in question.
- Price comparisons are based on the total order cost, including product price, sales tax, and shipping.
- Price matching is not available for exchanges, replacements, or warranty claims.
Please Note: Some Exclusions May Apply
Returns
Refunds and Returns Policy
We know things don’t always go as planned. Whether you received the wrong item or need to send something back, our return process is here to keep things simple. Here's what you need to know:
Return Timeframe
You may request a return within 30 days of receiving your order. Please reach out within that window to ensure eligibility.
Return Eligibility Criteria
To be considered for a return:
- Items must be unused and in original condition
- All tags and packaging must be intact
- A receipt or order confirmation is required
Products that arrive used, installed, or altered will not qualify for a return.
How to Request a Return
Email our support team at support@servicesupplydepot.com to begin the return process. We’ll respond with detailed return instructions and the appropriate return address.
Please do not return items without contacting us first. Unauthorized returns will not be accepted.
Shipping Costs for Returns
If your order arrived damaged or we sent the wrong item—we’ve got you covered. We’ll take care of the return shipping cost.
If you're returning something because you changed your mind or ordered the wrong item, we kindly ask that you cover the return shipping
Do you have a restocking fee?
Yes, we charge a 25% restocking fee. This fee covers inspection, repackaging, and restocking logistics.
Return Method
All returns must be shipped back to us—we do not accept in-person or drop-off returns.
Return Labels
For defective or damaged items, please get in touch with us and we’ll email you a prepaid return label. Simply download, print, and attach the label to your return package.
Refunds
Once your return arrives and passes inspection, we’ll notify you via email. If the return is approved, your refund will be issued to the original payment method within 3–5 business days.
Refund Not Received?
If it’s been more than 5 business days since your refund approval:
- Recheck your bank account
- Contact your card provider
- Check with your bank for processing times
Still waiting? Reach out to us at support@servicesupplydepot.com and we’ll investigate.
Order Issues & Damaged Shipments
We ask that you inspect your shipment upon delivery. If anything arrives broken, incorrect, or incomplete, contact us immediately so we can resolve the issue without delay.
Product Exchanges
We only offer exchanges for products that are damaged or defective. If you need a replacement for the same item, contact us at support@servicesupplydepot.com and we’ll get you set up.
Shipping Address Changes
If you need to update the shipping address for an order, please notify us within 24 hours of placing your order. Once processing begins, address changes are not guaranteed.
Item Added to Your Cart
Customers also bought...
Allavino - 24" Wide FlexCount II Tru-Vino 172 Bottle Dual Zone Black Wine Refrigerator
$1,939.75
Refrigerator Configuration
Allavino - 24" Wide FlexCount II Tru-Vino 177 Bottle Single Zone Wine Refrigerator
$1,939.75
Refrigerator Configuration
Allavino - FlexCount Series 349 Bottle Three Zone Tall Side-by-Side Wine Refrigerator
$3,632.83
Number of Wine Zones
Allavino - FlexCount Series Side-by-Side Built-in Wine Refrigerators with Black Doors
$2,574.08
Number of Wine Zones
Allavino - FlexCount Series tall side-by-side wine refrigerator Stainless Steel Doors
$3,726.33
Number of Wine Zones
Related Products
3
visitors right now
3
visitors have this item in their cart right now
3
people have bought this item
3
% of people buy 2 or more